software

 

With a single computer and one LD24, it is possible to control and monitor a network of up to eight LM24 processors or up to eight PLM6800 (RACon for  LM24 and RACon for PLM6800 are two different software versions and they cannot be used at the same time).
A straightforward visual interface provides simplified setup of even very large PalcoPlus systems. It simply requires the choice of a configuration from the bank of presets, and the selection of the elements of the system that each processor will control.
From there, each preset can be modified to suit the application, using complete control of delay on the output channels, system EQ,
output levels for each channel, and input gain adjustments.
Each processor has a ten-band, fully parametric equalizer with ±12 dB of boost/cut and variable ‘Q’ on each filter, all of which may be set at any frequency from 10 Hz to 18 kHz. Delay control for each pair of output channels permits alignment adjustment in 1 ms steps, up to 310 ms (more than 100 m).
All monitoring is provided in both numerical data and on familiar graphic readouts, while the visual control interface offers familiar panel-style knobs and sliders for verification at a glance.
The program perfectly adjusts the output signals to the amplifiers based on information entered regarding the amplifiers’ input sensitivity and output power, or output power and gain.
Personalized settings can be saved in the user preset banks of the connected LM24s, or PLM6800s, and saved as files to the user’s computer for rapid sharing or communication of system configurations.

Minimum hardware requirements

Operating system:	Windows® 98 SE or above
Processor:	Pentium® III 750 MHz or above
Graphics card resolution:	1024 x 768 - 16M colors
RAM:	64 MB
Free HD space:	10 MB

 

 

Elettronica Montarbo s.r.l. (P.IVA IT 01742700436)
via G. di Vittorio 1340057 Cadriano Granarolo Emilia - Bologna (Italy)
tel. +39 051 766437 fax +39 051 765226
e-mail: mail@palcoplus.com

Company under the control of Eko Music Group Spa